[Q13-Q32] Pass FlashArray-Implementation-Specialist Exam in First Attempt Guaranteed 100% Cover Real Exam Questions [Mar-2026]

Pass FlashArray-Implementation-Specialist Exam in First Attempt Guaranteed 100% Cover Real Exam Questions [Mar-2026]

Valid FlashArray-Implementation-Specialist test answers & Pure Storage FlashArray-Implementation-Specialist exam pdf

NEW QUESTION # 13
A customer would like to consolidate their SAS shelves and wants to evacuate multiple shelves in parallel. What is a prerequisite for this procedure?

• A. The array chassis must be fully populated with modules.
• B. Purity must be upgraded to 6.x
• C. The array usage percentage must be lower than 60%

Answer: C

Explanation:
To evacuate multiple shelves in parallel safely during consolidation, the array's usage must be sufficiently low (under 60%) to ensure enough free capacity for data movement.

NEW QUESTION # 14
An Implementation Engineer needs to run the puresetup replace procedure on the FlashArray//X during a controller upgrade.
Which command should the Implementation Engineer run on the new controller to determine its model?

• A. hwconfig --all
• B. hwconfig --model
• C. purearray list --controller

Answer: B

Explanation:
The command hwconfig --model returns the model information of the controller, which is essential before running the puresetup replace procedure.

NEW QUESTION # 15
Before leaving the site after an install, who is required to provide completion sign-off?

• A. Account team
• B. Customer
• C. Support

Answer: B

Explanation:
The customer's completion sign-off is required to confirm that the installation meets their expectations and requirements before the engineer leaves the site.

NEW QUESTION # 16
Which enablement feature will cause Mirrored Write statistics to appear in the Analysis section of the FlashArray Purity 6.x GUI?

• A. FA File
• B. ActiveCluster (AC)
• C. ActiveDR

Answer: B

Explanation:
Mirrored Write statistics appear in the Purity GUI's Analysis section when ActiveCluster is enabled, as it tracks synchronous replication activity between clusters.

NEW QUESTION # 17
A client needs to upgrade Purity on their FlashArray, but is unable to wait for an available upgrade date from support.
What action should the customer take?

• A. Open a ticket with support, download the latest Purity version, copy to a USB flash drive, and run the pureinstall command on each controller.
• B. Go through the Self-Service upgrade portal on Pure1 Manage and upgrade to the latest Purity version.
• C. Log into the Purity CLI, download the latest Purity version, and run the pureinstall command on each controller.

Answer: B

Explanation:
Customers can independently upgrade Purity using the Self-Service upgrade portal on Pure1 Manage, enabling them to proceed without waiting for support scheduling.

NEW QUESTION # 18
After running puredb run giveback --safe command once CT0 has been upgraded, how long should the Implementation Engineer wait before continuing with the controller upgrade?

• A. 3 minutes
• B. 10 minutes
• C. 5 minutes

Answer: B

Explanation:
Waiting 10 minutes after running puredb run giveback --safe ensures the system completes safe resource rebalancing and stabilizes before proceeding with the next controller upgrade step.

NEW QUESTION # 19
A customer would like to reduce SafeMode settings for retention and eradication with their current policy.
How is authorization obtained to make the requested changes?

• A. A Pure1 Admin needs to approve any changes for Pure Support to proceed.
• B. The local account on FlashArray needs to permit any local changes.
• C. Two SafeMode approvers need to acknowledge via Pure1 step-up authentication before any changes can be made.

Answer: C

Explanation:
Reducing SafeMode retention and eradication settings requires approval from two designated SafeMode approvers via Pure1's step-up authentication to ensure secure and authorized policy changes.

NEW QUESTION # 20
In a situation where FC cards need to be re-used during a controller upgrade, which is a valid transfer path?

• A. M > XR2/3
• B. M > XR2
• C. XR2 > XR3

Answer: A

Explanation:
FC cards from an M-series array can be reused in XR2 or XR3 controllers, allowing hardware continuity during controller upgrades.

NEW QUESTION # 21
An Implementation Engineer is assigned to install a 4X Module 9.1 TB Conversation Kit in a Flash Array Chassis. Why are there only four Direct Flash Modules?

• A. To widen an existing write group.
• B. To replace a missing shipment
• C. To fill out enclosure bays.

Answer: A

Explanation:
Installing four DirectFlash Modules in a 9.1 TB Conversion Kit is intended to widen an existing write group, improving performance and capacity distribution within the FlashArray.

NEW QUESTION # 22
If a Technical Support Engineer (TSE) is not available to perform health checks after an installation, what action should the Implementation Engineer take?

• A. Verify that Remote Assist (RA) is open and update the case.
• B. Update and close the case.
• C. Email the account team

Answer: A

Explanation:
Ensuring Remote Assist is enabled allows Support to perform remote health checks, and updating the case keeps all parties informed for follow-up.

NEW QUESTION # 23
An Implementation Engineer performs a controller upgrade. What is the command to check I/O health?

• A. purehost monitor --balance
• B. pureport list --initiator
• C. purehost list --all

Answer: A

Explanation:
The command purehost monitor --balance checks the distribution and health of I/O across hosts and initiators, helping verify balanced I/O after a controller upgrade.

NEW QUESTION # 24
When should a FlashArray support case be opened?

• A. Once an issue arises
• B. Once install is completed
• C. Before starting install

Answer: C

Explanation:
Opening a support case before starting the installation ensures timely assistance and coordination with support throughout the deployment process.

NEW QUESTION # 25
At the completion of an upgrade, which command is used to send phonehome logs?

• A. purelogs --send-all
• B. purearray phonehome --send-today
• C. purearray phonehome --send-logs

Answer: C

Explanation:
The command purearray phonehome --send-logs is used to send all Phonehome logs to support upon completion of an upgrade.

NEW QUESTION # 26
An Implementation Engineer is beginning a controller upgrade. Which command should be run to stop Purity?

• A. pureadm stop
• B. pureadm stop --secondary
• C. pureadm stop --controller CT0

Answer: C

Explanation:
The command pureadm stop --controller CT0 specifically stops Purity on the designated controller (CT0), which is the correct step to safely begin a controller upgrade.

NEW QUESTION # 27
Before proceeding with a controller upgrade, phonehome logs must be sent. What command will verify that the logs have been sent?

• A. purearray phonehome --check
• B. purearray phonehome --list
• C. purearray phonehome --status

Answer: C

Explanation:
The command purearray phonehome --status provides the current status of Phonehome log transmissions, confirming whether logs have been successfully sent before an upgrade.

NEW QUESTION # 28
Which default speed FC SFPs are shipped in FlashArray//XCR4 FC arrays?

• A. 0
• B. 1
• C. 2

Answer: C

Explanation:
FlashArray//XCR4 arrays are shipped with 32Gb Fibre Channel (FC) SFPs by default. These 32Gb FC SFPs are capable of supporting 64Gb speeds, which can be enabled via a firmware upgrade. This allows the array to leverage higher-speed FC connections as needed.

NEW QUESTION # 29
Before installing array rails, where should the cage nuts be placed?

• A. Lowest square of top RU
• B. Lowest square of lowest RU
• C. Top square of the lowest RU

Answer: B

Explanation:
Cage nuts should be placed in the lowest square hole of the lowest rack unit (RU) where the array rails will be installed to ensure proper alignment and support.

NEW QUESTION # 30
What should an Implementation Engineer do when installing rails in a threaded-hole rack?

• A. Make an adjustment to the rack
• B. Use the positioning studs
• C. Install the rails as is

Answer: B

Explanation:
Positioning studs are used to align and secure the rails correctly in a threaded-hole rack, ensuring proper installation and stability of the FlashArray.

NEW QUESTION # 31
Upon completion of a hardware upgrade activity, which command should be used to unset the maintenance tag?

• A. purealert untag --maintenance
• B. purealert --unset
• C. purealert tag --cancel

Answer: A

Explanation:
The command purealert untag --maintenance removes the maintenance tag after a hardware upgrade, signaling the system that maintenance mode has ended.

NEW QUESTION # 32
......

Pure Storage FlashArray-Implementation-Specialist Exam Syllabus Topics:

Topic	Details
Topic 1	Upgrades: This section of the exam measures the skills of FlashArray Implementation Specialists and focuses on tasks involved in managing firmware and software upgrades. Candidates must demonstrate knowledge of upgrade planning, verification steps, and rollback procedures, ensuring that systems are updated with minimal disruption to service.
Topic 2	Post-Installation Upgrade: This section of the exam measures the skills of FlashArray Implementation Specialists and evaluates how professionals confirm system functionality after installation or an upgrade. It involves validating connectivity, running health checks, confirming configurations, and ensuring that the deployment meets operational expectations.
Topic 3	Installation: This section of the exam measures the skills of Enterprise Infrastructure Technicians and focuses on executing a successful installation of FlashArray systems. It tests the ability to perform physical setup, cabling, configuration of network settings, and the application of initial system configurations necessary for full deployment.
Topic 4	Pre-Installation Upgrade: This section of the exam measures the skills of Enterprise Infrastructure Technicians and covers all preparation activities before deploying or upgrading a Pure Storage FlashArray. It includes understanding environmental requirements, verifying prerequisites, checking compatibility, and validating system readiness through appropriate tools and documentation.

 

FlashArray-Implementation-Specialist Exam Questions – Valid FlashArray-Implementation-Specialist Dumps Pdf: https://examtorrent.dumpsactual.com/FlashArray-Implementation-Specialist-actualtests-dumps.html