FSCP Exam Info and Free Practice Test Professional Quiz Study Materials
Accurate Hot Selling FSCP Exam Dumps 2026 Newly Released
Forescout FSCP Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION # 36
What should be done after the Managed Windows devices are sent to a policy to determine the Windows 10 patch delivery optimization setting?
- A. Push out the proper DWORD setting via GPO
- B. Write sub-rules to check for each of the DWORD values used in patch delivery optimization
- C. Non Windows 10 devices must be called out in sub-rules so that the relevant DWORD value may be changed
- D. Non Windows 10 devices must be called out in sub-rules since they will not have the relevant DWORD
- E. Manageable Windows devices are not required by this policy
Answer: B
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
After managed Windows devices are sent to a policy to determine the Windows 10 patch delivery optimization setting, the best practice is to write sub-rules to check for each of the DWORD values used in patch delivery optimization.
Windows 10 Patch Delivery Optimization DWORD Values:
Windows 10 patch delivery optimization is configured through DWORD registry settings in the following registry path:
* Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\DeliveryOptimization The primary DWORD value is DODownloadMode, which supports the following values:
* 0 = HTTP only, no peering
* 1 = HTTP blended with peering behind the same NAT (default)
* 2 = HTTP blended with peering across a private group
* 3 = HTTP blended with Internet peering
* 63 = HTTP only, no peering, no use of DO cloud service
* 64 = Bypass mode (deprecated in Windows 11)
Why Sub-Rules Are Required:
When implementing a policy to manage Windows 10 patch delivery optimization settings, administrators must create sub-rules for each possible DWORD configuration value because:
* Different Organizational Requirements - Different departments or network segments may require different delivery optimization modes (e.g., value 1 for some devices, value 0 for others)
* Compliance Checking - Each sub-rule verifies whether a device has the correct DWORD value configured according to organizational policy
* Enforcement Actions - Once each sub-rule identifies a specific DWORD value, appropriate remediation actions can be applied (e.g., GPO deployment, messaging, notifications)
* Granular Control - Sub-rules allow for precise identification of devices with non-compliant delivery optimization settings Implementation Workflow:
* Device is scanned and identified as Windows 10 managed device
* Policy queries the DODownloadMode DWORD registry value
* Multiple sub-rules evaluate the current DWORD value:
* Sub-rule for value "0" (HTTP only)
* Sub-rule for value "1" (Peering behind NAT)
* Sub-rule for value "2" (Peering across private group)
* Sub-rule for value "3" (Internet peering)
* Sub-rule for value "63" (No peering, no cloud)
* Matching sub-rule triggers appropriate policy actions
Why Other Options Are Incorrect:
* A. Push out the proper DWORD setting via GPO - This is what you do AFTER checking via sub-rules, not what you do after sending devices to the policy
* B. Non Windows 10 devices must be called out in sub-rules since they will not have the relevant DWORD - While non-Windows 10 devices should be excluded, the answer doesn't address the core requirement of checking each DWORD value
* C. Manageable Windows devices are not required by this policy - This is incorrect; managed Windows devices are the focus of this policy
* D. Non Windows 10 devices must be called out in sub-rules so that the relevant DWORD value may be changed - This misses the point; you check the DWORD values first, not change them in sub-rules Referenced Documentation:
* Microsoft Delivery Optimization Reference - Windows 10 Deployment
* Forescout Administration Guide - Defining Policy Sub-Rules
* How to use Group Policy to configure Windows Update Delivery Optimization
NEW QUESTION # 37
When configuring policies, which of the following statements is true regarding the indicated property?
Select one:
- A. Modifies the irresolvable condition to TRUE
- B. Negates the criteria outside the property
- C. Negates the criteria inside the property
- D. Negates the "evaluate irresolvable as" setting
- E. Irresolvable hosts would match the condition
Answer: C
Explanation:
Based on the policy condition image provided showing the NOT checkbox on "Windows Antivirus Update Data", the correct statement is that the NOT operator negates the criteria inside the property.
Understanding the NOT Operator:
When the NOT checkbox is selected on a policy condition property, it performs a logical negation (NOT operation) on the criteria evaluation. According to the Forescout Administration Guide:
The NOT operator creates an inverted evaluation:
* Without NOT: "Windows Antivirus Update Data = [value]"
* Result: Matches endpoints where the property equals the specified value
* With NOT (as shown in the image): "NOT (Windows Antivirus Update Data = [value])"
* Result: Matches endpoints where the property does NOT equal the specified value How the NOT Operator Works:
The NOT operator negates the criteria inside the property:
* Criteria Evaluation - The property condition is evaluated normally first
* Negation Applied - The result is then inverted (TRUE becomes FALSE, FALSE becomes TRUE)
* Final Result - The endpoint matches only if the negated condition is true Example from the Image:
The image shows:
* First criterion: "Windows Antivirus Running - 360 Sat" (AND)
* Second criterion: "NOT Windows Antivirus Update Data" (checked)
This means:
* The endpoint must have Windows Antivirus Running = True (360 Sat)
* AND the endpoint must NOT have the Windows Antivirus Update Data property value (whatever was specified)
* The NOT negates the criteria inside the property condition
NOT vs. "Evaluate Irresolvable As":
According to the documentation, these are independent settings:
Setting
Purpose
NOT Checkbox
Negates the criteria evaluation (inverts the match logic)
Evaluate Irresolvable As
Defines how to handle unresolvable properties (when data cannot be determined) The NOT operator works inside the property evaluation, while "Evaluate Irresolvable As" is a separate setting that determines behavior when a property cannot be resolved.
Why Other Options Are Incorrect:
* A. Irresolvable hosts would match the condition - The NOT operator doesn't specifically affect how irresolvable properties are handled
* C. Negates the criteria outside the property - The NOT operator is internal to the property; it negates the criteria inside, not outside
* D. Modifies the irresolvable condition to TRUE - The NOT operator doesn't modify the "Evaluate Irresolvable As" setting; these are independent
* E. Negates the "evaluate irresolvable as" setting - The NOT operator and "Evaluate Irresolvable As" are separate; NOT doesn't affect or negate that setting Policy Condition Structure:
According to the Forescout Administration Guide:
A policy condition is structured as:
text
[NOT] [Property Name] [Operator] [Value]
Where:
* [NOT] - Optional negation operator (what the checkbox controls)
* [Property Name] - The property being evaluated
* [Operator] - The comparison operator (equals, contains, greater than, etc.)
* [Value] - The value to match against
When NOT is checked, it negates the entire criteria evaluation inside that property condition.
Referenced Documentation:
* Forescout Administration Guide v8.3
* Forescout Administration Guide v8.4
* Define policy scope documentation
* Forescout eyeSight policy sub-rule advanced options
NEW QUESTION # 38
Which of the following lists contain items you should verify when you are troubleshooting a failed switch change VLAN action?
Select one:
- A. The Switch Vendor is compatible for the change VLAN action
The managing appliance IP is allowed read VLAN access to the switch
The network infrastructure allows CounterACT SSH and SNMP Get traffic to reach the switch The action is disabled in the policy - B. The Switch Vendor is compatible for the change VLAN action
The Enterprise manager IP is allowed read VLAN access to the switch
The network infrastructure allows CounterACT SSH and SNMP Get traffic to reach the switch The action is disabled in the policy The Switch Model is compatible for ACL actions The Enterprise manager IP is allowed write VLAN changes to the switch The network infrastructure allows CounterACT SSH and SNMP Trap traffic to reach the switch The action is enabled in the policy - C. The Switch Vendor is compatible for all actions
The managing appliance IP is allowed read VLAN access to the switch
The network infrastructure allows CounterACT SSH and SNMP Set traffic to reach the switch The action is enabled in the policy - D. The Switch Model is compatible for the change VLAN action
The managing appliance IP is allowed write VLAN changes to the switch
The network infrastructure allows CounterACT SSH and SNMP Set traffic to reach the switch The action is enabled in the policy
Answer: D
Explanation:
According to the Forescout Switch Plugin Configuration Guide Version 8.12 and 8.14.2, when troubleshooting a failed change VLAN action, you should verify: "The Switch Model is compatible for the change VLAN action, The managing appliance IP is allowed write VLAN changes to the switch, The network infrastructure allows CounterACT SSH and SNMP Set traffic to reach the switch, The action is enabled in the policy".
Troubleshooting Switch VLAN Changes:
According to the Switch Plugin documentation:
When a VLAN assignment fails, verify:
* Switch Model Compatibility
* Not all switch models support VLAN changes via SNMP/SSH
* Consult Forescout compatibility matrix
* Refer to Appendix 1 of Switch Plugin guide for capability summary
* Managing Appliance Permissions
* The managing appliance must have write access to VLAN settings
* Requires appropriate SNMP community strings or SNMPv3 credentials
* Must be allowed to execute SNMP Set commands
* Network Infrastructure
* SSH access to the switch (CLI) - typically port 22
* SNMP Set traffic to the switch - port 161
* NOT "SNMP Get" (read-only) or "SNMP Trap" (notifications)
* SNMP Set is specifically for write operations like VLAN assignment
* Policy Action Status
* The action must be enabled in the policy
* If the action is disabled, it won't execute regardless of other settings Why Option C is Correct:
According to the documentation:
* # Switch Model (not Vendor) - Model-specific capabilities matter
* # Managing appliance (not Enterprise Manager) - For distributed deployments
* # SNMP Set (not Get or Trap) - Required for write/change operations
* # Action enabled (not disabled) - Prerequisite for execution
Why Other Options Are Incorrect:
* A - Mixes incorrect items: "action is disabled" is wrong; "SNMP Trap" is for notifications, not VLAN changes
* B - States "SNMP Get" (read-only) instead of "SNMP Set" (write); has "action is disabled"
* D - Says "all actions" instead of "change VLAN action"; uses "SNMP Set" correctly but other details wrong Referenced Documentation:
* Forescout CounterACT Switch Plugin Configuration Guide v8.12
* Switch Plugin Configuration Guide v8.14.2
* Switch Configuration Parameters
* Switch Restrict Actions
NEW QUESTION # 39
Select the action that requires symmetrical traffic.
- A. Endpoint ACL
- B. Assign to VLAN
- C. Start SecureConnector
- D. Virtual Firewall
- E. WLAN block
Answer: A
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Administration Guide and Switch Plugin documentation, the action that requires symmetrical traffic is the Endpoint Address ACL action (C).
What "Symmetrical Traffic" Means:
Symmetrical traffic refers to network traffic where CounterACT can monitor BOTH directions of communication:
* Inbound - Traffic from the endpoint
* Outbound - Traffic to the endpoint
This allows CounterACT to see the complete conversation flow.
Endpoint Address ACL Requirements:
According to the Switch Plugin documentation:
"The Endpoint Address ACL action applies an ACL that delivers blocking protection when endpoints connect to the network. Other benefits of Endpoint Address ACL include..." For the Endpoint Address ACL to function properly, CounterACT must:
* See bidirectional traffic - Monitor packets in both directions
* Apply dynamic ACLs - Create filtering rules based on both source and destination
* Verify endpoints - Ensure the endpoint IP/MAC matches expected patterns in both directions Why Symmetrical Traffic is Required:
According to the documentation:
Endpoint Address ACLs work by:
* Identifying the endpoint's MAC address and IP address through bidirectional observation
* Creating switch ACLs that filter based on the endpoint's communication patterns
* Verifying the endpoint is communicating in expected ways (symmetrically) Without symmetrical traffic visibility, CounterACT cannot reliably identify and apply address-based filtering.
Why Other Options Do NOT Require Symmetrical Traffic:
* A. Assign to VLAN - Only requires knowing the switch port; doesn't need traffic monitoring
* B. WLAN block - Works at the wireless access point level without needing symmetrical traffic observation
* D. Start SecureConnector - Deployment action that doesn't require traffic symmetry
* E. Virtual Firewall - Works at the endpoint level and can function with asymmetrical or passive monitoring Asymmetrical vs. Symmetrical Deployment:
According to the administrative guide:
* Asymmetrical Deployment - CounterACT sees traffic from one direction only
* Used for passive monitoring of device discovery
* Sufficient for many actions
* Symmetrical Deployment - CounterACT sees traffic in both directions
* Required for endpoint ACL actions
* Necessary for accurate address-based filtering
Referenced Documentation:
* Endpoint Address ACL Action documentation
* ForeScout CounterACT Administration Guide - Switch Plugin actions
NEW QUESTION # 40
Which setting is NOT available when initially adding a server to the User Directory Plugin?
- A. Test
- B. Replica
- C. Domain
- D. Advanced
- E. Domain Aliases
Answer: B
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout User Directory Plugin Configuration Guide and supported integration documentation, Replica is NOT available when initially adding a server to the User Directory Plugin.
Replicas are configured after the initial server setup is complete.
User Directory Server Initial Setup Process:
When initially adding a User Directory server, the following settings are available:
* Server Name - The name to identify the server in Forescout
* Address - The IP address or FQDN of the User Directory server
* Port - The port number (typically 389 for LDAP, 636 for secure LDAP)
* Domain - The domain name associated with the User Directory
* Test - Option to test the connection and credentials
* Advanced - Advanced configuration options
Replica Configuration - Post-Initial Setup:
According to the documentation:
"After configuring server settings, you can configure server tests and replicas." The Replica settings are NOT available during the initial server addition. Instead, replicas are configured as a separate step after the primary server configuration is complete.
Replica Setup Workflow:
According to the User Directory Plugin configuration process:
* Step 1: Add Server - Configure the primary server with Name, Address, Port, Domain
* Step 2: Test Connection - Use the Test option to verify connectivity
* Step 3: Configure Replicas - After the primary server is fully configured, then add replica servers The documentation explicitly states:
"Refer to the following sections for server configuration details. After configuring server settings, you can configure server tests and replicas." Why Other Options Are Available Initially:
* A. Test -#Available initially; allows testing of server credentials and connectivity before completion
* B. Domain -#Available initially; domain name is required during server setup
* C. Domain Aliases -#Available initially; additional domain aliases can be specified for the server
* D. Advanced -#Available initially; advanced options like authentication types, TLS, etc. are available during setup Replica Purpose:
Replicas are used to provide redundancy and failover capability. According to the documentation:
When replica servers are configured:
* If the primary User Directory server becomes unavailable, the Forescout platform can failover to a replica server
* Multiple replicas can be specified for increased fault tolerance
Referenced Documentation:
* Forescout User Directory Plugin Configuration - Server Setup documentation
* Configure server settings - After configuring server settings section
* User Directory Plugin configuration videos and tutorials showing initial setup flow
NEW QUESTION # 41
Policies will recheck when certain conditions are met. These may include...
- A. Policy categorization, admission event, action schedule activation
- B. Policy recheck timer expires, group name change, SC event change
- C. Policy recheck timer expires, admission event, SC event change
- D. Admission event, policy categorization, SC event change
- E. Admission event, group name change, Scope recheck timer expires
Answer: C
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Administration Guide, policies recheck when the following conditions are met: Policy recheck timer expires, admission event, or SC event change.
Policy Recheck Conditions:
According to the Main Rule Advanced Options documentation:
"By default, both matched endpoints and unmatched endpoints are rechecked every eight hours, and on any admission event." Additionally, according to the documentation:
"You can also configure several recheck settings to work simultaneously. For example, when a host IP address changes every five hours, recheck settings can be configured for:
* Policy recheck timer expires - Default 8 hours
* Admission events - Triggers like DHCP request, IP address change
* SC (SecureConnector) event change - When SecureConnector status changes" Three Main Policy Recheck Triggers:
According to the documentation:
* Policy Recheck Timer Expires
* Default: Every 8 hours
* Can be customized (1 hour to infinite)
* Applies to all endpoints matching or not matching the policy
* Admission Event
* DHCP Request
* IP Address Change
* Switch Port Change
* Authentication event
* VPN user connection
* Immediate recheck when triggered
* SC Event Change
* SecureConnector deployed or removed
* SecureConnector status changes (online/offline)
* SecureConnector version changes
Why Other Options Are Incorrect:
* A. Admission event, group name change, Scope recheck timer expires - Group name change is NOT a recheck trigger
* C. Admission event, policy categorization, SC event change - Policy categorization is NOT a recheck trigger
* D. Policy categorization, admission event, action schedule activation - Neither policy categorization nor action schedule activation triggers rechecks
* E. Policy recheck timer expires, group name change, SC event change - Group name change does NOT trigger policy rechecks Recheck Configuration:
According to the documentation:
"You can configure under what conditions to perform a recheck. By default, endpoints are rechecked every eight hours, and on any admission event. To define the recheck policy, you can configure:
* Custom recheck interval (instead of 8 hours)
* Which admission events trigger rechecks
* Whether SecureConnector events trigger rechecks"
Referenced Documentation:
* Main Rule Advanced Options
* Forescout eyeSight policy main rule advanced options
* When Are Policies Run - Policy Recheck section
NEW QUESTION # 42
Which of the following is true regarding Failover Clustering module configuration?
- A. Segments should be assigned to appliance folders and NOT to the individual appliances.
- B. Once appliances are configured, then press the Apply button.
- C. You can see the status of failover by selecting IP Assignments and failover tab.
- D. Place only the EM to participate in failover in the folder.
- E. Configure the second HA on the Secondary node.
Answer: A
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Resiliency Solutions User Guide and Failover Clustering configuration documentation, the correct statement is: "Segments should be assigned to appliance folders and NOT to the individual appliances".
Failover Clustering Folder Structure:
According to the Resiliency Solutions User Guide:
"When configuring failover: Identify segments of the CounterACT Internal Network that should participate in failover, and assign these segments to the folder." Key requirement:
"Clear statically assigned segments from Appliances in the failover cluster folder. Appliances in the failover cluster support only the network segments assigned to the folder. They cannot support individually assigned segments." Segment Assignment Rules:
According to the documentation:
text
Correct Configuration:
## Failover Cluster Folder
# ## Assigned Segments: Segment1, Segment2, Segment3
# ## Appliance A (no individual segments)
# ## Appliance B (no individual segments)
# ## Appliance C (no individual segments)
NOT this way:
text
Incorrect Configuration:
## Failover Cluster Folder
# ## Appliance A: Segment1
# ## Appliance B: Segment2
# ## Appliance C: Segment3
Configuration Steps:
According to the official procedure:
* Create or select an appliance folder
* Place appliances in the folder
* Assign segments to the FOLDER (not individual appliances)
* Clear any statically assigned segments from individual appliances
* Configure the folder as a failover cluster
Why Other Options Are Incorrect:
* A. Once appliances are configured, then press the Apply button - Failover uses "Configure Failover" button, not "Apply"
* C. See failover status by selecting IP Assignments and failover tab - It's the "IP Assignment and Failover pane," not a separate tab
* D. Configure the second HA on the Secondary node - Incorrect; failover clustering is configured at the folder level, not on individual nodes
* E. Place only the EM to participate in failover - Incorrect; member appliances participate; EM has separate HA Referenced Documentation:
* ForeScout CounterACT Resiliency Solutions User Guide - Failover Clustering section
* Define a Forescout Platform failover cluster
* Forescout Platform Failover Clustering
* Work with Appliance Folders
NEW QUESTION # 43
Which of the following properties can be determined by the HPS Plugin? (Choose two)
- A. AD group membership
- B. Operating System
- C. External Device on Windows
- D. HTTP banner
- E. Application installed on Mac OS
Answer: B,D
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout HPS Inspection Engine Configuration Guide and HPS Applications Plugin documentation, the properties that can be determined by the HPS Plugin are: Operating System (C) and HTTP banner (E).
HPS Plugin Capabilities:
According to the HPS Inspection Engine guide:
"The HPS (Host Property Scanner) Inspection Engine provides host properties for detecting endpoint characteristics including operating system, services, and applications." The HPS plugin determines:
* Operating System - OS type, version, service pack level
* HTTP Banner - Service versions from HTTP banner scanning
* Services and Applications - Running processes and installed software
* System Information - Hardware vendor, NIC vendor, etc.
Operating System Detection:
According to the HPS Applications Plugin guide:
"Windows operating system information is detected by the HPS Applications Plugin, including: Release, Package/flavor, Service Pack" The plugin detects:
* Windows OS versions (XP, Vista, 7, 8, 10, etc.)
* Server editions (2003, 2008, 2012, 2016, etc.)
* Service pack levels
* OS build information
HTTP Banner Detection:
According to the HPS Inspection Engine guide:
"Service Banner: Indicates the service and version information, as determined by Nmap. HTTP banner scanning returns service identification information." The HTTP banner property is resolved by NMAP scanning with the -sV parameter, which is part of the HPS plugin's classification capabilities.
Why Other Options Are Incorrect:
* A. Application installed on Mac OS - The HPS Applications Plugin is for Windows applications only; it does not detect Mac OS applications
* B. External Device on Windows - External Device detection is a separate property unrelated to HPS plugin discovery
* D. AD group membership - This is determined by the User Directory plugin via LDAP, not the HPS plugin HPS Plugin vs. Other Plugins:
According to the documentation:
Property
HPS Plugin
Other Plugins
Operating System
#Yes
N/A
HTTP Banner
#Yes (NMAP)
N/A
Windows Applications
#Yes
N/A
AD Group Membership
#No
User Directory
Mac OS Applications
#No
macOS-specific
External Devices
#No
Network discovery
Referenced Documentation:
* CounterACT Endpoint Module HPS Inspection Engine Configuration Guide v10.8
* CounterACT HPS Applications Plugin Configuration Guide v2.1.4
* About the HPS Applications Plugin
NEW QUESTION # 44
Irresolvable hosts would match the condition. When configuring policies, which of the following statements is true regarding this image?
Select one:
- A. Modifies the irresolvable condition to TRUE
- B. Generates a NOT condition in the sub-rule condition
- C. Negates the criteria outside the property
- D. Has no effect on irresolvable hosts
Answer: D
Explanation:
Based on the image showing "Meets the following criteria" radio button selected (as opposed to "Does not meet the following criteria"), the correct statement is: "Has no effect on irresolvable hosts".
Understanding "Meets the following criteria":
According to the Forescout policy configuration documentation:
When "Meets the following criteria" is selected:
* Normal Evaluation - The condition is evaluated as written
* No Negation - There is NO inversion of logic
* Irresolvable Handling - Separate setting; the "Meets" choice does NOT affect irresolvable handling Irresolvable Hosts - Independent Setting:
According to the policy sub-rule advanced options documentation:
"The 'Meets the following criteria' radio button and the 'Evaluate irresolvable as' checkbox are independent settings."
* "Meets the following criteria" - Controls normal/negated evaluation
* "Evaluate irresolvable as" - Controls how unresolvable properties are treated The selection of "Meets the following criteria" has no specific effect on how irresolvable hosts are handled.
Why Other Options Are Incorrect:
* B. Generates a NOT condition - "Meets" does NOT generate NOT; it's the normal condition
* C. Negates the criteria outside - "Meets" does not negate anything; it's the affirmative option
* D. Modifies irresolvable condition to TRUE - The "Evaluate irresolvable as" setting controls that, not
"Meets"
Referenced Documentation:
* Define policy scope
* Forescout eyeSight policy sub-rule advanced options
* Forescout Platform Policy Sub-Rule Advanced Options
NEW QUESTION # 45
When using Remote Inspection for Windows, which of the following properties require fsprocsvc.exe interactive scripting?
- A. Antivirus Running
- B. Update Microsoft Vulnerabilities
- C. Windows Expected Script Result
- D. Windows Service Running
- E. User Directory Common Name
Answer: C
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
The Windows Expected Script Result property is the correct answer. According to the official Forescout CounterACT Endpoint Module: HPS Inspection Engine Configuration Guide Version 10.8, the fsprocsvc.exe service is required to run interactive scripts for several CounterACT tasks during Remote Inspection operations on Windows endpoints.
The documentation explicitly lists the following Properties requiring the fsprocsvc service (with Remote Inspection, i.e., not via SecureConnector):
* Windows Expected Script Result #
* Device Interfaces
* Number of IP Addresses
* External Devices
* Windows File MD5 Signature
* Windows Is Behind NAT
* Microsoft Vulnerabilities
About fsprocsvc.exe Service:
The fsprocsvc.exe service is a proprietary ForeScout service utility that is downloaded by the HPS Inspection Engine to endpoints. It is used to run interactive scripts for several CounterACT tasks. Key characteristics include:
* Size on disk: Approximately 250KB
* Memory acquired during runtime: 2 MB
* Runs under: System context
* Start type: Automatic
* Inactivity timeout: After 2 hours of inactivity, the service stops automatically
* Communication: Does not open any new network connection. Communication is carried out over Microsoft's SMB/RPC (445/TCP and 139/TCP) with domain credentials authentication Why Other Options Are Incorrect:
* A. User Directory Common Name - This property is derived from User Directory plugin queries and does not require fsprocsvc interactive scripting
* B. Update Microsoft Vulnerabilities - This is an action, not a property. While Microsoft Vulnerabilities property does require fsprocsvc, "Update" is not the property name listed
* D. Antivirus Running - This is a basic WMI-based property that does not require interactive scripting via fsprocsvc
* E. Windows Service Running - This is a basic property that can be determined through WMI queries without requiring fsprocsvc interactive scripting Interactive Scripts Requirement:
According to the HPS Inspection Engine Configuration Guide, WMI does not support interactive scripts on all Windows endpoints. When WMI is used for Remote Inspection, CounterACT uses the fsprocsvc service to run interactive scripts on endpoints that require them. The Windows Expected Script Result property specifically requires running a custom script on the endpoint, which necessitates the fsprocsvc service for proper execution.
Referenced Documentation:
* Forescout CounterACT Endpoint Module: HPS Inspection Engine Configuration Guide Version 10.8
* Section: "About fsprocsvc.exe" and "Properties requiring the service (With remote inspection, i.e. not via SecureConnector)"
NEW QUESTION # 46
Which of the following plugins assists in classification for computer endpoints? (Choose two)
- A. DNS Client
- B. HPS Inspection Engine
- C. Advanced Tools
- D. Linux Plugin
- E. Switch
Answer: B,C
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Administration Guide and Base Modules documentation, the plugins that assist in classification for computer endpoints are HPS Inspection Engine (B) and Advanced Tools (D).
HPS Inspection Engine Classification:
According to the HPS Inspection Engine Configuration Guide:
"The HPS Inspection Engine powers CounterACT tools used for classifying endpoints. These tools include the classification engine that is part of HPS Inspection Engine, the Primary Classification, Asset Classification and Mobile Classification templates, the Classify actions, and Classification/Classification (Advanced) properties." The HPS Inspection Engine provides:
* Classification Engine - Determines the Network Function property
* Primary Classification Template - Classifies endpoints into categories
* Asset Classification Template - For asset-level classification
* Mobile Classification Template - For mobile device classification
* Multiple Classification Methods - Including NMAP, HTTP banner scanning, SMB analysis, passive TCP/IP fingerprinting Advanced Tools Plugin Classification:
According to the Advanced Tools Plugin documentation:
"The Advanced Tools Plugin is used to classify endpoints based on characteristics such as operating system, hardware vendor, and application software." The Advanced Tools Plugin provides:
* Endpoint Classification - Based on OS, vendor, and applications
* Device Property Resolution - Resolves device characteristics
* Fingerprinting - Identifies endpoints based on behavioral patterns
Why Other Options Are Incorrect:
* A. Switch - The Switch Plugin manages network devices (switches) and provides VLAN/access control, not endpoint classification
* C. Linux Plugin - The Linux Plugin is a platform-specific module for managing Linux endpoints, not a general classification tool
* E. DNS Client - The DNS Client Plugin resolves DNS queries but does not assist with endpoint classification Classification Workflow:
According to the documentation:
When classifying computer endpoints, Forescout uses:
* HPS Inspection Engine - Primary classification tool analyzing:
* HTTP banners from web services
* SMB protocol information
* NMAP scans and service detection
* Passive TCP/IP fingerprinting
* Domain credentials analysis
* Advanced Tools Plugin - Secondary classification providing:
* Vendor/model information
* Application detection
* Operating system identification
* Hardware characteristics
Together, these plugins provide comprehensive endpoint classification for computer systems.
Classification Properties Resolved:
According to the Base Modules documentation:
The HPS Inspection Engine and Advanced Tools plugins resolve:
* Function (Workstation, Printer, Server, Router, etc.)
* Operating System (Windows, Linux, macOS, etc.)
* Vendor and Model information
* Network Function (specific device role)
* Application information
Referenced Documentation:
* CounterACT Endpoint Module HPS Inspection Engine Configuration Guide v10.8
* Forescout Platform Base Modules
* About the Forescout Advanced Tools Plugin
NEW QUESTION # 47
Where are the plugin logs located in the CounterACT CLI?
- A. /usr/local/log/plugin/<plugin ID>
- B. /usr/local/forescout/log
- C. /usr/local/forescout/log/plugin/<plugin ID>
- D. /usr/local/forescout/plugin/log/<plugin ID>
- E. /usr/local/forescout/plugin/<plugin ID>/log
Answer: C
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout CLI Commands Reference Guide and official documentation, the plugin logs in the CounterACT CLI are located at the path /usr/local/forescout/log/plugin/<plugin ID>.
CLI Log File Structure:
The Forescout CLI organizes log files in a hierarchical directory structure. When using the CLI to access logs, administrators can navigate through the following directory structure:
* log - View appliance log files
* log:plugin - Access plugin-specific log directories
* log:plugin/<plugin ID> - Access logs for a specific plugin
Example Plugin Log Locations:
According to the documentation, specific plugin logs can be accessed using the following CLI commands:
text
list log:plugin/<plugin ID>
monitor log:plugin/<plugin ID>/<plugin_name>.log
For example, the Python server logs for the Connect Module are located at: /usr/local/forescout/plugin
/connect_module/python_logs
CLI Commands for Accessing Plugin Logs:
The correct CLI syntax for accessing plugin logs includes:
text
list log:plugin/<plugin ID> - Lists plugin log directory contents
monitor log:plugin/<plugin ID>/<plugin_name>.log - Monitors plugin log in real-time view log:plugin/<plugin ID>/<plugin_name>.log - Views plugin log file contents search <pattern> log:plugin/<plugin ID>/<plugin_name>.log - Searches within plugin logs Why Other Options Are Incorrect:
* A. /usr/local/forescout/plugin/<plugin ID>/log - Inverted directory structure; log is a parent directory, not a subdirectory of the plugin ID
* B. /usr/local/forescout/plugin/log/<plugin ID> - Incorrect path structure; "log" is not a subdirectory under "plugin"
* C. /usr/local/forescout/log - Too generic; this path refers to appliance-wide logs, not plugin-specific logs
* D. /usr/local/log/plugin/<plugin ID> - Incorrect root path; Forescout logs are stored under /usr/local
/forescout, not /usr/local
Referenced Documentation:
* Forescout CLI Commands Reference Guide - List Directories and Log Files section
* Python Log Location documentation
* FS-CLI Commands - File and Log Management section
* Examples showing log:plugin path structure in CLI reference guides
NEW QUESTION # 48
What are the important network traffic types that should be monitored by CounterACT?
- A. Backup Networks, Encrypted/Tunneled networks, DHCP
- B. LWAP traffic, Authentication traffic, Backup Networks
- C. LWAP traffic, DHCP, Backup Networks
- D. Encrypted/Tunneled networks, DHCP, Web traffic
- E. Web traffic, Authentication traffic, DHCP
Answer: E
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Administration Guide and CounterACT Installation Guide, the important network traffic types that should be monitored by CounterACT include Web traffic, Authentication traffic, and DHCP.
Important Network Traffic Types:
According to the official documentation, CounterACT gains visibility into key network traffic types:
* DHCP Traffic - Used for endpoint discovery and device classification via the DHCP Classifier Plugin
* Authentication Traffic - Includes 802.1X requests to RADIUS servers; critical for understanding network access patterns and user-to-endpoint mapping
* Web Traffic (HTTP/HTTPS) - Used for HTTP banner scanning and HTTP-based device classification DHCP Traffic Importance:
According to the DHCP Classifier Plugin Configuration Guide:
"The DHCP Classifier Plugin extracts host information from DHCP messages. Hosts communicate with DHCP servers to acquire and maintain their network addresses. CounterACT extracts host information from DHCP message packets, and uses DHCP fingerprinting to determine the operating system and other host configuration information." The documentation states:
"The plugin lets CounterACT retrieve host information when methods such as the CounterACT packet engine or HPS Nmap scanner are unavailable, or in situations where CounterACT cannot monitor all traffic." Authentication Traffic Importance:
According to the solution brief:
"Monitor 802.1X requests to the built-in or external RADIUS server"
This allows CounterACT to map users to endpoints and understand authentication patterns on the network.
Web Traffic Importance:
According to the documentation:
"Optionally monitor a network SPAN port to see network traffic such as HTTP traffic and banners" HTTP traffic analysis enables:
* Service banner identification
* HTTP header analysis for device classification
* Web-based application discovery
CounterACT Discovery Methods:
According to the Visibility solution brief, CounterACT uses multiple methods to see devices, including:
* Poll switches, VPN concentrators, access points and controllers
* Receive SNMP traps from switches and controllers
* Monitor 802.1X requests to RADIUS server (Authentication Traffic)
* Monitor DHCP requests to detect when hosts request IP addresses
* Optionally monitor network SPAN port for HTTP traffic and banners
* Run NMAP scans
Why Other Options Are Incorrect:
* A. Encrypted/Tunneled networks, DHCP, Web traffic - While important, encrypted/tunneled networks are not "monitored" by CounterACT in the way DHCP is; Authentication traffic is more important
* B. LWAP traffic, DHCP, Backup Networks - LWAP (Lightweight AP Protocol) is proprietary Cisco protocol; not a standard CounterACT monitoring priority; Backup Networks are not a traffic type
* C. Backup Networks, Encrypted/Tunneled networks, DHCP - "Backup Networks" is not a network traffic type; Authentication traffic is more important than encrypted/tunneled traffic monitoring
* E. LWAP traffic, Authentication traffic, Backup Networks - LWAP is not a standard CounterACT monitoring priority; Backup Networks is not a network traffic type Referenced Documentation:
* Forescout Transforming Security through Visibility - Solution Brief
* Forescout DHCP Classifier Plugin Configuration Guide Version 2.1
* CounterACT Installation Guide - Network Access Requirements
NEW QUESTION # 49
What is the best practice to pass an endpoint from one policy to another?
- A. Use function property
- B. Use sub rules
- C. Use policy condition
- D. Use operating system property
- E. Use groups
Answer: B
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Platform Administration and Deployment Documentation, the best practice to pass an endpoint from one policy to another is to use SUB-RULES.
Sub-Rules and Policy Routing:
Sub-rules are conditional branches within a Forescout policy that allow for sophisticated endpoint routing and handling. When an endpoint matches a sub-rule condition, it can be directed to perform specific actions or be passed to another policy group for further evaluation.
Key Advantages of Using Sub-Rules:
* Granular Control - Sub-rules enable precise segmentation of endpoints based on multiple properties and conditions
* Hierarchical Processing - Once an endpoint matches a sub-rule, it proceeds down the sub-rule branch; later sub-rules of the policy are not evaluated for that endpoint
* Efficient Endpoint Routing - Sub-rules allow endpoints to be efficiently routed to appropriate policy handlers without evaluating unnecessary conditions
* Policy Chaining - Sub-rules facilitate the logical flow and routing of endpoints through multiple policy layers Best Practice Implementation:
The documentation emphasizes that when designing policies for endpoint management, administrators should:
* Use sub-rules to create conditional branches that evaluate endpoints against multiple criteria
* Route endpoints to appropriate policy handlers based on their properties and compliance status
* Avoid using simple property-based routing when complex multi-step evaluation is needed Why Other Options Are Incorrect:
* A. Use operating system property - While OS properties can be used in conditions, they are not the mechanism for passing endpoints between policies
* C. Use function property - Function properties are not used for inter-policy endpoint routing
* D. Use groups - While groups are useful for organizing endpoints, they are not the primary best practice for passing endpoints between policies
* E. Use policy condition - Policy conditions define what endpoints should be evaluated, but sub-rules provide the actual routing mechanism Referenced Documentation:
* Forescout Platform Administration Guide - Defining Policy Sub-Rules
* "Defining Forescout Platform Policy Sub-Rules" - Best Practice section
* Sub-Rule Advanced Options documentation
NEW QUESTION # 50
Place the DNS Enforce control actions into the correct workflow order for endpoints which have a pending control action.
Answer:
Explanation:
NEW QUESTION # 51
When an admission event is seen, how are main rules and sub-rules processed?
- A. Main rules process in parallel, sub-rules process concurrently.
- B. Main rules process sequentially, sub-rules process in parallel.
- C. Main rules process concurrently, sub-rules process in parallel.
- D. Main rules process sequentially, sub-rules process concurrently.
- E. Main rules process concurrently, sub-rules process sequentially.
Answer: E
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Administration Guide - Policy Processing, when an admission event occurs, "Main rules process concurrently, sub-rules process sequentially".
Policy Processing Flow:
According to the Main Rule Advanced Options documentation:
When an admission event triggers policy evaluation:
* Main Rules - Process concurrently/in parallel
* All main rules are evaluated simultaneously
* No ordering or sequencing
* Each main rule evaluates independently
* Sub-Rules - Process sequentially/in order
* Sub-rules within each main rule execute one after another
* First match wins - stops evaluating subsequent sub-rules
* Order matters for sub-rule execution
Main Rule Concurrent Processing:
According to the documentation:
"Main rules are evaluated independently and concurrently. Multiple main rules can be processed simultaneously for the same endpoint." Sub-Rule Sequential Processing:
According to the Defining Policy Sub-Rules documentation:
"Sub-rules are evaluated sequentially in the order defined. When an endpoint matches a sub-rule, that sub- rule's actions are taken and subsequent sub-rules are not evaluated." Example Processing:
When admission event triggers:
text
CONCURRENT (Main Rules):
## Main Rule 1 evaluation # Sub-rule processing (sequential)
## Main Rule 2 evaluation # Sub-rule processing (sequential)
## Main Rule 3 evaluation # Sub-rule processing (sequential)
(All main rules evaluate at the same time)
Why Other Options Are Incorrect:
* B. Parallel/Concurrently - "Concurrent" and "parallel" mean the same thing; sub-rules don't process concurrently
* C. Concurrent/Parallel - Sub-rules don't process in parallel; they're sequential
* D. Sequential/Concurrently - Main rules don't process sequentially; they're concurrent
* E. Sequential/Parallel - Main rules don't process sequentially; they're concurrent Referenced Documentation:
* Main Rule Advanced Options
* Defining Policy Sub-Rules
NEW QUESTION # 52
Which of the following is true regarding the Windows Installed Programs property which employs the "for any
/for all" logic mechanism?
- A. Although the condition has multiple sub-properties, the "any/all" refers to the programs and not the sub- properties.
- B. Although the condition has multiple sub-properties, the "any/all" refers to the sub-properties and not the programs.
- C. Although the condition has multiple sub-properties, when "ANY" is selected it evaluates the programs for any of the configured sub-properties.
- D. Although the condition has sub-properties which could refer to a single program on multiple endpoints, the "any/all" refers to the program's properties.
- E. The condition does not have any sub-properties. The "any/all" refers to the multiple programs.
Answer: A
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
The Windows Installed Programs property condition utilizes multiple sub-properties including Program Name, Program Version, Program Vendor, and Program Path. However, when using the "for ANY/for ALL" logic mechanism, the "any/all" refers to the PROGRAMS and not to the sub-properties.
How the "Any/All" Logic Works with Windows Installed Programs:
When configuring a policy condition with the Windows Installed Programs property, the "any/all" logic determines whether an endpoint should match the condition based on:
* "For ANY" - The endpoint matches the policy condition if ANY of the configured programs are installed on the endpoint
* "For ALL" - The endpoint matches the policy condition if ALL of the configured programs are installed on the endpoint Example: If an administrator creates a condition like:
* Windows Installed Programs contains "Microsoft Office" OR "Adobe Reader"
* Using "For ANY": The endpoint matches if it has EITHER Microsoft Office OR Adobe Reader installed
* Using "For ALL": The endpoint matches only if it has BOTH Microsoft Office AND Adobe Reader installed The sub-properties (Program Name, Version, Vendor, Path) are used to define and identify which specific programs to match against, but the "any/all" logic applies to the PROGRAMS themselves, not to the sub- properties.
Why Other Options Are Incorrect:
* A - Incorrectly states the "any/all" evaluates the programs for the sub-properties
* B - Factually incorrect; the condition definitely has multiple sub-properties (Name, Version, Vendor, Path)
* C - Confuses the scope; the "any/all" does not refer to "program's properties" but to multiple programs
* D - Inverted logic; the "any/all" refers to the programs, not the sub-properties Referenced Documentation:
* Forescout Administration Guide v8.3, v8.4
* Working with Policy Conditions - List of Properties by Category
* Windows Applications Content Module Configuration Guide
NEW QUESTION # 53
When configuring policy conditions, which of the statements is true regarding this image?
Select one:
- A. Negates the criteria as part of the property
- B. Modifies the irresolvable condition to TRUE
- C. Generates a NOT condition in the sub-rule condition
- D. Modifies the evaluate irresolvable condition to FALSE
- E. Irresolvable hosts would match the condition
Answer: A
Explanation:
Based on the policy condition image showing "Does not meet the following criteria", the correct statement is that it negates the criteria as part of the property.
Understanding "Does not meet the following criteria":
According to the Forescout Administration Guide:
The "Does not meet the following criteria" radio button option in policy conditions creates a logical negation of the condition:
* "Meets the following criteria" - Endpoint matches if the condition is true
* "Does not meet the following criteria" - Endpoint matches if the condition is FALSE (negated) How the Negation Works:
According to the documentation:
"Use the AND value between both properties: Windows>Manageable Domain>Does not meet the following criteria" This syntax shows that "Does not meet the following criteria" negates the entire criteria evaluation:
* Normal condition: "Windows Antivirus Running = True"
* Result: Matches endpoints WITH antivirus running
* Negated condition: "Windows Antivirus Running Does not meet the following criteria (= True)"
* Result: Matches endpoints WITHOUT antivirus running (negates the criteria) Negation Happens at Property Level:
The negation is applied as part of the property evaluation, not as a separate NOT operator. When you select
"Does not meet the following criteria":
* The condition is evaluated normally
* The result is then negated/inverted
* The endpoint matches only if the negated result is true
Why Other Options Are Incorrect:
* B. Modifies the irresolvable condition to TRUE - "Does not meet the following criteria" doesn't specifically affect irresolvable property handling
* C. Generates a NOT condition in the sub-rule condition - The negation is part of this property's evaluation, not a separate sub-rule NOT condition
* D. Irresolvable hosts would match the condition - "Does not meet the following criteria" doesn't specifically target irresolvable hosts
* E. Modifies the evaluate irresolvable condition to FALSE - This setting doesn't affect the "Evaluate irresolvable as" setting Referenced Documentation:
* Forescout Administration Guide v8.3
* Forescout Administration Guide v8.4
* ForeScout CounterACT Administration Guide - Policy Conditions section
* Manage Actions documentation
NEW QUESTION # 54
......
Get 100% Authentic Forescout FSCP Dumps with Correct Answers: https://examtorrent.dumpsactual.com/FSCP-actualtests-dumps.html
