2022 Easily pass NCM-MCI5.15 Exam with our Dumps & PDF Test Engine
NCM-MCI5.15 PDF Pass Leader, NCM-MCI5.15 Latest Real Test
NEW QUESTION 13
While creating an image placement policy on the organizations AOS 5.15-based Nutanix cluster, the administrator wants to ensure there are no restrictions on using the selected images on clusters outside of the identified set.
What type of Policy Enforcement must the administrator choose?
- A. Soft
- B. Internal
- C. Hard
- D. External
Answer: A
Explanation:
NEW QUESTION 14
An administrator needs to replace an aging SAN and move to a hyper-converged infrastructure. The existing environment consists of the following hosts that are connected to the SAN:
* 5xAIX hosts
* 3x Hyper-V hosts
* 9xESXi hosts
* 2x physical SQL Clusters (Windows Server 2012R2 hosts)
After deploying a Nutanix AHV cluster, which two actions should the administrator take to meet the requirements? (Choose two.)
- A. Deploy Volumes to support the AIX and SQL workloads.
- B. Deploy Files to support the AIX hosts.
- C. Migrate the ESXi and Hyper-V workloads using Move.
- D. Migrate the ESXI workloads to AHV using Move.
Answer: A,C
Explanation:
Ref: https://portal.nutanix.com/#page/kbs/details?targetId=kA00e000000Cr7GCAS
NEW QUESTION 15
An administrator is configuring an All Flash cluster to support the following workloads:
* Full clone virtual desktops
* Hadoop
* Write heavy databases
Which three correct configuration options should the administrator use to meet the item requirements? (Choose three.) For each procedure, indicate whether it is a correct or incorrect procedure that must be configured to meet the item requirements using the drop-down option.
Answer:
Explanation:
Explanation:
Ref:
NEW QUESTION 16
An administrator is trying to correct high cluster IOPs and Cluster Controller Latency. Networking is the suspected issue.
Which networking parameters should be configured in the Nutanix cluster?
- A. Number of NICs connected and frame size
- B. Number of NICs connected and network latency.
- C. Number of NICs connected and bond state.
- D. Bond State and network latency
Answer: A
NEW QUESTION 17
An administrator is migrating 5MB shares from a third-party platform to Nutanix Files with the following characteristics:
* Shares contain user profile directories
* DFS-N will be used
How should the administrator create target shares for this migration?
- A. Create distributed shares with multiple top-level directories and distribute migrated data.
- B. Create multiple distributed shares and distribute migrated data as evenly as possible.
- C. Create standard shares with multiple top-level directories and distribute migrated data.
- D. Create multiple general purpose shares and distribute migrated data as evenly as possible.
Answer: A
Explanation:
Ref: https://portal.nutanix.com/page/documents/details/?targetId=Files-v3_6:Files-v3_6
NEW QUESTION 18
A customer has a four-node cluster and is using Volume Groups to provide storage services to a SQL cluster.
In the event of a CVM failure in the cluster, what is the expected IO path of the volume group's iSCSI targets?
- A. vDisk directed at failure CVM are redirected to Data Services IP until CVM is reconnected
- B. vDisk directed to failed CVM are redirected to another CVM and automatically reconnect
- C. vDisk directed at failed CVM will disconnect and reconnect when the failed CVM comes back online
- D. vDisk directed to CVM that failed to disconnect and will not reconnect without manual intervention
Answer: B
NEW QUESTION 19
A Nutanix cluster is deployed with the following configuration:
* Three four-node blocks (A, B, and C)
* All Flash Redundancy Factor 2
What is the effect of simultaneous disk failures on two nodes located in block A?
- A. VMs are migrated off of the nodes with disk failures.
- B. VM read and write operations continue normally.
- C. Each node with a failed disk is marked as degraded.
- D. VMs on the nodes with failed disks are unable to write data
Answer: B
Explanation:
Ref: https://next.nutanix.com/how-it-works-22/redundancy-factor-vs-replication-factor-37486
NEW QUESTION 20
An administrator needs to expand a cluster based on AHV and running on Nutanix G5 hardware with a new Nutanix G7 system. The cluster is running AOS 5.10 but the operation fails when expanding the cluster. AOS is running on the new system. There are no issues discovering the node.
Why is the operation failing?
- A. EVC needs to be configured before cluster expansion
- B. G7 hardware cannot be added to a G5 cluster.
- C. AOS version running on G7 is older than the version on the cluster.
- D. Foundation software has not been updated on the cluster.
Answer: C
Explanation:
Ref: https://next.nutanix.com/installation-configuration-23/product-mixing-restrictions-37231
NEW QUESTION 21
A customer has two mission-critical applications and needs to have them backed up to a remote location. The remote location is connected using a leased line and has an average latency of 7 ms.
Which Nutanix technology will provide the shortest RPO possible?
- A. NearSync
- B. Metro Availability
- C. Leap
- D. Asyn&DR
Answer: C
Explanation:
Ref: https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2005_Data_Protection:BP-2005_Data_Protection
NEW QUESTION 22
An administrator learns that some security settings in a cluster have been changed. The environment is out of compliance with required policies.
Which function should be used to revert any settings that have changed from the defaults and prevent further violations?
- A. Advanced Intrusion Detection Environment (AIDE)
- B. Cluster Lockdown with strong password enforcement
- C. Defense Information Systems Agency STIG enforcement
- D. Security Configuration Management Automation (SCMA)
Answer: D
Explanation:
Ref: http://myvirtualcloud.net/nutanix-scma-the-security-feature-that-could-save-your-organization/
NEW QUESTION 23
A customer has a Nutanix cluster with 10Gb connectivity via switch fabric extenders. The administrator receives NCC health check errors of latency greater than 200ms.
Which action should the administrator take to resolve the NCC errors?
- A. Replace the switch fabric extenders with 10G line rate switches
- B. Upgrade NCC and increase the vCPU of the CVM
- C. Add 2 additional 10G uplinks from the switch fabric extenders per node
- D. Upgrade NCC and increase the CVM memory by 4Gb
Answer: A
Explanation:
Ref: https://portal.nutanix.com/page/documents/details?targetId=System-Specs-G6-Single-Node:set-block-connect-c.html
NEW QUESTION 24
An administrator receives an alert in Prism indicating that interface eth2, on an AHV host is receiving many CRC errors. After togging into the problematic host, the following command is run to show the indicated output:
What is causing this issue?
- A. A misconfigured bond
- B. The interface is incorrectly configured with Jumbo Frames
- C. Incorrect link speeds on the switch
- D. A physical layer network problem
Answer: B
Explanation:
Ref:
rx_crc_errors are caused either by faults in layer 1 (in the past, we have seen failed twinax cables and incorrect types of fibre being used), or issues with jumbo frames on the network. In an environment with 10 Gig switches that use cut-through forwarding (Cisco Nexus, Arista, Cisco devices using IOS default to Store and Forward switching), any packets that come into the switch will get forwarded out the destination interface once the switch has read the destination MAC address. If that packet has an MTU over what is configured on the interface, it will cut off the packet at the designated MTU, causing the server to receive a malformed packet, which will throw a CRC error.
If you have a layer 1 issue, you will see rx_crc_errors, not on all but one or two nodes.
NEW QUESTION 25
Refer to the exhibit.
An administrator logs in to Prism and sees the status shown in the exhibit within the Hardware Diagram section.
What should the administrator do?
- A. Check status of applications running on the cluster and call support
- B. Reseat all disks immediately. If this does not help, reseat the nodes.
- C. Resolve all alerts and re-import the disks to make sure there is no service disruption.
- D. Restart all CVMs for the cluster to check, confirm health and repartition and add the disks.
Answer: A
NEW QUESTION 26
An administrator is planning to deploy a Nutanix cluster to support a few high-performance VMs. This deployment will have the following considerations:
* Individual VMs will likely generate network throughputs in the range of 90-100Mbps
* Due to the configuration of the VMs, it is unlikely that a node will host more than one or two of them at a time
* Individual VMs will communicate with only a few (one or two) remote hosts at a time
* Multicast will not be used in the environment
* The hosts are connected via two 1GbE network connections
How should the administrator configure the network bonds to meet this requirement while maintaining the simplest switch configuration?
- A. Configure bond0 as balance-sib
- B. Configure bond0 as active-backup
- C. Configure bond0 as balance-tcp
- D. Configure bond0 as balance-lacp
Answer: A
Explanation:
Ref: https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2071-AHV-Networking:top_ahv_networking_best_practices.html
NEW QUESTION 27
An administrator is managing multiple Windows and Linux VMs connected to Nutanix Volumes. The Linux VMs are experiencing intermittent connectivity issues. The Windows VMs do not experience the same issue.
Which option should the administrator use to resolve this issue?
- A. Utilize Jumbo Frames
- B. Add additional disks to the Volume Group
- C. Utilize a separate subnet for the Linux VMs
- D. Set the SCSI timeout value to 60
Answer: D
Explanation:
Ref: https://kb.vmware.com/s/article/1009465
NEW QUESTION 28
A company needs to replicate their VMs to a remote site and must have an RPO of less than 1 hour.
When creating a protection domain, what should an administrator do to meet this requirement?
- A. Enable Near-Sync Replication with an RPO of 15 minutes
- B. Enable Async Replication with an RPO of 60 minutes
- C. Enable Entity Sync on the designated VMs
- D. Enable Availability Zones and send the VM to multiple targets
Answer: B
Explanation:
Ref: https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:sto-pd-guidelines-r.html
NEW QUESTION 29
An administrator is notified that a bare metal database server is down. This database server is being served storage using a Nutanix Volume Group. Upon investigating, the administrator finds that the disks in the database server that map to the vDisks in the volume group have gone offline.
What is causing this issue?
- A. A CVM serving the Volume Group has gone offline.
- B. Port 9443 is blocked in the server firewall.
- C. The Volume Group Load Balancer has been disabled.
- D. Port 3260 has been blocked in the server firewall.
Answer: A
NEW QUESTION 30
......
NCM-MCI5.15 Dumps Ensure Your Passing: https://examtorrent.dumpsactual.com/NCM-MCI5.15-actualtests-dumps.html
